来自磁光阱中冷原子团的荧光干涉条纹及其应用

实验观察来自磁光阱中冷原子团的荧光经真空系统窗口的平板玻璃反射产生的干涉条纹，理论分析表明从从荧光干涉条纹的强度分布可获得关于俘获原子总数以及密度分布的信息。采用该方法实测了俘获原子总数，并模拟得到了不同密度分布时条纹的对比度变化。     

一种简易云雾室的制作

本文利用自制云雾室把微观粒子的运动转化为宏观现象，从而供实验观察和研究。     

BEPC中电子云导致的束团横向尺寸增长研究

多束团正电子储存环中可能发生电子云不稳定性. 由于电子云导致的束团横向尺寸增长已经成为提高对撞机对撞亮度的主要限制因素之一. 介绍了在BEPC储存环中, 利用条纹相机直接测量由于电子云导致的束团横向尺寸增长结果, 并与模拟计算进行了比较.     

Living anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide: Synthesis of well‐defined poly(N‐isopropylacrylamide) having various stereoregularity

Anionic polymerization of N‐methoxymethyl‐N‐isopropylacrylamide ( 1 ) was carried out with 1,1‐diphenyl‐3‐methylpentyllithium and diphenylmethyllithium, ‐potassium, and ‐cesium in THF at ?78 °C for 2 h in the presence of Et₂Zn. The poly( 1 )s were quantitatively obtained and possessed the predicted molecular weights based on the feed molar ratios between monomer to initiators and narrow molecular weight distributions (M_w/M_n = 1.1). The living character of propagating carbanion of poly( 1 ) either at 0 or ?78 °C was confirmed by the quantitative efficiency of the sequential block copolymerization using N,N‐diethylacrylamide as a second monomer. The methoxymethyl group of the resulting poly( 1 ) was completely removed to give a well‐defined poly(N‐isopropylacrylamide), poly(NIPAM), via the acidic hydrolysis. The racemo diad contents in the poly(NIPAM)s could be widely changed from 15 to 83% by choosing the initiator systems for 1 . The poly(NIPAM)s obtained with Li⁺/Et₂Zn initiator system possessed syndiotactic‐rich configurations (r = 75–83%), while either atactic (r = 50%) or isotactic poly(NIPAM) (r = 15–22%) was generated with K⁺/Et₂Zn or Li⁺/LiCl initiator system, respectively. Atactic and syndiotactic poly(NIPAM)s (42 < r < 83%) were water‐soluble, whereas isotactic‐rich one (r < 31%) was insoluble in water. The cloud points of the aqueous solution of poly(NIPAM)s increased from 32 to 37 °C with the r‐contents. These indicated the significant effect of stereoregularity of the poly(NIPAM) on the water‐solubility and the cloud point in water © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4832–4845, 2006     

水溶性聚合物和两亲聚合物:12.环氧乙烷-环氧丙烷无规共聚醚结构与性能的关系

来用连续加料法,以二元醇-KOH为引发剂合成一组不同组成的环氧乙烷-环氧丙烷无规共聚醚,并用核磁共振、红外光谱、示差扫描量热计和热失重等方法对其本体聚合物,用浊点和表面张力测定的方法对其水溶液,进行系统的表征。     

Functional polythiiranes 7: Surface activity of polythiiranes with PEO side chains

 Some comb-like polythiiranes with PEO side chains were prepared from the corresponding macromonomers. These new materials are amphiphiles and act as surfactants. Their surface tension and interfacial tension are measured and studied in this paper on account of their structures. The lowering of surface tension measured in polymers bearing methyl terminal group in PEO side chains, are in the same range as these observed with polymers of identical structures but different main chains. An increase of the hydrophobic units in the main chain, obtained in copolymers with methylthiirane does not significantly modified the surface tensions. Better lowering is afforded with structures bearing large alkyl groups as terminal group of PEO side chains. On the contrary, some of these macro-molecules with an optimized EO content largely lower the water/xylene surface tension. The main interest of these new materials is their very low cmc and the stabilization of L₁-type microemulsions. Received: 20 May 1997 Accepted: 25 November 1997     

Evaluation of the factors affecting extraction of organic compounds based on the acid-induced phase cloud point approach

On the basis of a better analytical exploitation of acid-induced cloud point approach, a systematic study on the phase behaviour of acid aqueous solutions of anionic surfactants and factors affecting anionic surfactant-mediated extractions was performed. The anionic surfactants investigated were alkylsulphonates (ASS) with alkylchain lengths comprised between 8 and 16 carbon atoms. The critical hydrochloric acid concentration (minimal acid concentration required to separation in two liquid phases) was found to increase as alkylchain length of the anionic surfactant increased from 10 to 14. Non-acid-induced liquid-liquid phase separation was observed for sodium octanesulphonate (SOS) or sodium hexadecyl sulphonate (SHS) in the hydrochloric concentration range 0-10 M. Acid aqueous solutions of sodium decylsulphonate (SDeS) and sodium dodecylsulphonate (SDoS) separated into two liquid phases at temperatures ranging between 10 and 80 °C, while temperatures >35 °C were required for sodium tetradecylsulphonate. The influence on extraction efficiency and concentrating ability of experimental variables such as hydrophobicity and concentration of surfactant, nature and concentration of analyte, hydrochloric acid concentration, time and temperature of extraction and time of equilibration and centrifugation was examined. Advantages provided by anionic surfactant-mediated extractions over the use of non-ionic surfactants (cloud point extractions) are discussed.     

浊点萃取在生物大分子分离及分析中的应用

浊点萃取是一种新兴的环保型液2液萃取方法。本文介绍了表面活性剂胶束溶液的形成过程和浊点现象, 总结了浊点萃取法的操作方法, 并且详细讨论了它在生物大分子分离纯化及生物分析中的应用。最后探讨了该技术的发展前景。     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.     

Fast and solvent-free microwave-assisted synthesis of thermoresponsive oligo(glycidyl ether)s

Low-molecular weight linear poly(glycidyl ether)s are typically synthesized via the “classical,” oxy-anionic ring-opening polymerization (ROP) of glycidyl ether monomers at elevated temperatures. To reduce reaction times, a fast process was developed to synthesize oligo(glycidyl ether)s (OGEs) in bulk at a gram-scale utilizing microwave heating. Well-defined thermoresponsive copolymers comprising glycidyl methyl ether and ethyl glycidyl ether with molecular weights of up to 3 kDa were synthesized via microwave-assisted ROP with reaction times of approximately 10 min. The fast reaction kinetics were attributed to the rapid and uniform heating and high temperatures reached during the reaction. Consequently, no significant microwave-specific acceleration of the oxy-anionic ROP was observed. The temperature-triggered phase transition of the OGEs in aqueous solution revealed cloud point temperatures that are highly dependent on the OGE molecular weight, concentration, and comonomer composition, which extends previously reported data. Furthermore, oligo(glycidyl ether) acrylates (OGEAs) with reactive, functional end groups were directly accessible via in situ quenching of the anionic, microwave-assisted ROP with acrylic acid chloride. The obtained thermoresponsive OGEA macromonomers represent a promising material for the functionalization of surfaces via radical grafting methods to obtain functional, thermoresponsive coatings with potential application in cell culture. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2496–2504